Cooling Gap Glass Fiber Silicone Thermal Conductive Plate Die Cutting

Cooling gap fiberglass silicone thermal conductive plate die cut  PM1500 has excellent thermal conductivity and electrical insulation performance. Not only satisfy for majority electronic products thermal insulation requirements, but also widely used in the thermal requirements that are not too high in electronic products.

Featured Products

Cooling gap fiberglass silicone thermal conductive plate die cut  
Cooling Gap Fiberglass Silicone Thermal Conductive Plate Die Cut
Cooling Gap Fiberglass Silicone Thermal Conductive Plate Die Cut
Cooling Gap Fiberglass Silicone Thermal Conductive Plate Die Cut
Cooling Gap Fiberglass Silicone Thermal Conductive Plate Die Cut


PM1500 has excellent thermal conductivity and electrical insulation performance. Not only satisfy for majority electronic products thermal insulation requirements, but also widely used in the thermal requirements that are not too high in electronic products. With the stable heat conduction performance, and the product also has the viscosity, easy to use.

Karefonte-PM1500 is using soft silicone material heat-conducting, stable insulation performance, use in transmission interface between the electronic equipment and heat sink, which achieve heat transfer and insulation effect.

Applications:
1.LED lighting, lighting equipment
2.Household appliances LCD display
3.Between semiconductor and heat sink
4.Communication product, smart phone, tablet .
5.Desktop, notebook and other portable computer
6.Large power supply etc.

Performance and characteristics:
1.High thermal conductivity, heat transfer coefficient 15W/m-k
2.Stable performance, low thermal resistance, effectively improve the heat transfer speed
3.Low hardness, its viscosity high, easy to use 
4.V-O certification standards


Specification:
1.Standard size : 200mm*400mm, 300mm*400mm, according to customer needs cutting type.



2.Basic thickness 0.5mm~5mm, special thickness size can be customized.

3.Its slightly viscous, if need to strengthen the adhesive can be according to customer's requirement



4.Product color is mass production color, special color can be adjusted to actual situation .
 
 
Model No.PM1500Test Method
ColorGrey/Blue/Dark grey/Light greyVisual
ConstructionSilica gel***
Thickness0.02 to 0.04(inch)
0.508 to 10(mm)
ASTM D751
Density (g/cc)4.0ASTM D297
Hardness (Shore A)45±5ASTM D2240
Tensile Strength (psi)15ASTM D412
Use Temperature (°F/C)(-58 to 392°F)
(-58 to 200°C)
***
Electrical property
Breakdown voltage (V)>3000(Thickness0.5mm)
>5000(Thickness0.5mm")
ASTM D149
Dielectric Constant (1M HZ)15.0ASTM D150
Volume Resistivity (Ohm.cm))1017ASTM D257
Flame Rating94 VOEquivalent UL
Thermal conductivity
Thermal conductivity(W/m-k)15.0ASTM D5470
Can add fiberglassEvery thickness can add fiberglass, marked by FG

 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours