BST-SWALFS is a aluminum coated split fiberglass braided sleeve, there is adhesive strip along one edge to close the sleeve after installation. This sleeve is easily wrapped over the wires, cables and hoses, then closed with the adhesive. It is reflect more than 95% radiant heat.
It is used to protect the industry & automotive wires, cables, hydraulic hoses, piping and tubing from radiant heat sources.
It is used to protect the industry & automotive wires, cables, hydraulic hoses, piping and tubing from radiant heat sources.
| Part Number | Normal Inside diameter | |||||||
| Inches | mm | Dash # | ||||||
| BST-SWALFS-10 | 3/8 | 10 | -6 | |||||
| BST-SWALFS-13 | 1/2 | 13 | -8 | |||||
| BST-SWALFS-16 | 5/8 | 16 | -10 | |||||
| BST-SWALFS-19 | 3/4 | 19 | -12 | |||||
| BST-SWALFS-25 | 1 | 25 | -16 | |||||
| BST-SWALFS-29 | 1 1/8 | 29 | -18 | |||||
| BST-SWALFS-32 | 1 1/4 | 32 | -20 | |||||
| BST-SWALFS-35 | 1 3/8 | 35 | -22 | |||||
| BST-SWALFS-38 | 1 1/2 | 38 | -24 | |||||
| BST-SWALFS-41 | 1 5/8 | 41 | -26 | |||||
| BST-SWALFS-44 | 1 3/4 | 44 | -28 | |||||
| BST-SWALFS-48 | 1 7/8 | 48 | -30 | |||||
| BST-SWALFS-51 | 2 | 51 | -32 | |||||